SIB 18
contains PLMN identities for neighboring cells to be considered for use by a UE that is in either idle or connected mode.
SIB 17
contains information on shared common channels to be used in connected mode.
TDD only.
SIB 16
contains information on channel configuration (physical, transport and RB) to be stored in the UE for use during handover to UTRAN.
SIB 15-SIB15.4
contains information for UE positioning methods such as GPS or OTDOA.
SIB 14
contains outer loop power control information applied to dedicated and common physical channels.
TDD mode only
SIB 13-13.4
contains information on ANSI-41 parameters used with ANSI-41 core network.
SIB 12
contains measurement control information for a UE in connected mode.
If SIB 11 is not present it can also be used for UEs in idle mode.
SIB 11
contains measurement control information for a UE in idle mode.
If SIB 12 is not present it can also be used for UEs in connected mode.
SIB 10
contains information relevant to the DRAC procedure.
For FDD mode only.
Sent via FACH and the SCCPCH.
SIB 9
contains dynamic information for CPCH.
Only for FDD.
